The ES1232-A is the high performance ETK emulator test probe integration into the ES1000 system for measurement and calibration as well as for rapid prototyping applications. This board covers sophisticated requirements concerning real-time performance, huge data throughput and comfortable user handling.

The concentration on three ETK Interface Operating Modes with different performance levels provides optimal solutions to your applications. The board can be implemented easily without any necessary changes to current ECU projects by using the Basic Operating Mode. In this mode, the ES1232-A performs like the predecessor boards – the ETK interface is supported with a data transfer rate of 8 Mbit/s. The ES1232-A automatically switches to Compatibility Mode if the ETK allows Block Transfer Mode.

Furthermore, you can easily enjoy the complete capability of the ETK Interface Board with 100 Mbit/s data transfer rate and 16 measurement and bypass rasters after small adjustments of the ASAM 2MC file of your control unit program. Up to four ES1232-A plug-in boards can be used simultaneously in an ES1000 system.

Functions at a Glance

• High performance interface board to an ETK, electrically isolated
• ETK Interface Operating Mode: Basic, Compatibility, Advanced
• ETK Protocol Speed: 100 Mbit/s and 8 Mbit/s
• ETK Protocol Transfer: ‚Single Mode‘ and ‚Block Mode‘ data transfer
• Up to 32 rasters for measurement and rapid prototyping
• 16 MByte on-board measured data memory
• Automatic detection of ETK type and ETK configuration
• Data Acquisition Memory Controller (DAMC) for realtime connection of the ETK to the ES1000 system
• Up to four ETK Interfaces per ES1000
• Physical separation from the control unit with ETK and ES1000 (approx. 65.6 ft / 20 m)
• Firmware update of the ES1232-A in the ES1000 system possible via PC using service software
• Extended temperature range: -40°C to +85°C/-40°F to +185°F
• Integrated with ASCET-RP, INTECRIO, and INCA