Special measurement systems are often used for studying various physical processes and controlling/regulating them. These systems are usually based on analog signal measurements. Digital signals from an ECU can therefore be integrated only by digital/analog conversion of these signals.
ETAS offers the D/A board for these applications, permitting an analog output of 8 digital signals per board (captured via ETK (memory emulation) or CAN (CAN monitoring) from an ECU). The analog output can be configured (by selecting the ECU signal and assigning it to an output channel) and scaled (mapping to the output voltage range). The ES1310 provides a resolution of 12 bit and an output voltage range of 0 V to 10 V. A maximum of two ES1310 boards can be integrated into the ES1000.3, i.e. up to 16 signals can be output.
Functions at a Glance
- 8 analog outputs
- 12 bit resolution
- Output voltage range: 0 V to 10 V
- Output rate determined by signal acquisition raster via ETK or CAN
- 10 μs output rate of analog data between two successive values
- Lemo connector for EMC-safe connection to external measuring systems
- Electrical isolation of outputs