The parallel ETK ETK-V1 for Vertical Base Boards supports the following microcontrollers:
MPC5554
MPC5553
MPC5534
ETKV1
Bottom side with VertiCal Connector.
The ETK-V1 block diagram describes the functional design.
| Item | Characteristics |
|---|---|
|
CPU interface |
2.5 V / 3.3 V (auto-detect) bus interface for non-multiplexed bus |
|
Configuration |
Project-specific configuration for memory configurations stored in EEPROM |
|
Board |
Dimensions (H/W/D) approx. 10 x 54 x 54 mm / 0.4 x 2.1 x 2.1 in |
|
Power supply |
Input voltage |
|
Emulation memory |
Two memory pages with 1 MB (1024 KB) data memory each, minimum access time 23 nsec |
|
Measured data |
Within the emulation memory, freely configurable |
|
Flash memory |
1 MB (1024 KB) flash (data) |
|
Serial interface |
100 Mbit/s |
|
Temperature range |
-40°C to +110°C / -40°F to +230°F |