ETK7.1

The ETK-7.1 (16 Bit) is microcontroller independent. Please see the table below for further details.

The ETK-7.1 block diagram describes the functional design.

Item	Characteristics
CPU Interface	5 V compatible bus interface for multiplexed and non-multiplexed bus 8 bit or 16 bit Supports Intel, Siemens, Freescale, Renesas, and Toshiba processors
Configuration	Project-specific configuration for different processor types and memory configurations
Board	Dimensions approx. 9 x 50 x 85 mm / 0.4 x 2.0 x 3.3 in (H/W/D)
Power Supply	Input voltage 4.3 V to 18 V with ETP1 add-on module: 6.5 V to 36 V Standby: min. 4 V Input current at 12 V approx. 400 mA normal operation approx. 20 mA standby
Emulation memory	1 MB program memory, minimum access time: 50 nsec Two memory pages with 128 KB data memory each, minimum access time: 50 nsec
Measured data memory	64 KB
Flash memory	1 MB flash EPROM (program, data)
Serial interface	8/100 Mbit/s double-shielded line, max. 30 m / 100 ft galvanically isolated
Temperature range	-40°C to +110°C / -40°F to +230°F

ETAS - ETK7.1