ETAS - µETK-P1

µETK-P1

Parallel ETK µETK-P1 (32 Bit) for µ-Hybrid ECUs.

The µETK-P1 block diagram describes the functional design.

Item	µETKP1
CPU interface	3.3 V compatible bus interface for non-multiplexed bus 16 bit or 32 bit Supports Freescale processors
Configuration	Project-specific configuration for different processor types and memory configurations
Board	Dimensions (H/W/D) approx. 12 x 92 x 80 mm / 0.5 x 3.6 x 3.1 in
Power supply	Input voltage 4.3 V to 18 V with ETP1 add-on module: 5.2 V to 36 V Standby: min. 3.5 V Input current at 12 V approx. 150 mA normal operation approx. 20 mA standby
Emulation memory	Two memory pages with 128 KB data memory each, minimum access time: 50 nsec
Measured data memory	64 KB
Flash memory	128 KB flash (data)
Serial interface	8/100 Mbit/s double-shielded twisted pair, max. 30 m / 100 ft galvanically isolated
Temperature range	-40°C to +110°C / -40°F to +230°F briefly: +125°C / +257°F