Notes:
1: ECU needs to support DISTAB 13.
ASCET Software Products
Hardware Support
| ASCET- RP | |
|---|---|
| ES1000 Experimental System | |
| Housings | |
| ES1000.3 – Housing (VME64x) |
|
| System, Simulation and Rapid Prototyping Boards | |
| ES1120 – System Controller Board |
|
| ES1135 – Simulation/System Controller Board |
|
| ECU and Bus Interface Boards | |
| ES1222-A – CAN & K-Line Board |
|
| ES1232-A – ETK Interface Board |
|
| Measurement and Stimulation Boards: Digital and PWM I/O Boards | |
| ES1325 – Digital I/O, PWM I/O and Counter Board |
|
| Measurement and Stimulation Boards: Analog I/O Boards | |
| ES1303 – A/D Board |
|
| ES1310 – D/A Board |
|
| ASCET- RP | |
| Universal ETK / XETK ECU Interfaces | |
| Generic ETKs (Microcontroller Independent) | |
| ETK-7.1 |
|
| Specific ETKs (for Power PC Microcontrollers) | |
| ETK-P4 |
|
| ETK-P7 |
|
| ETK-P8.1 |
1
|
| ETK-P9 |
1
|
| ETK-P20 |
|
| ETKs/XETKs for Vertical Base Board (MPC55xx) | |
| ETK-V1.0 |
|
| ETKs for µ-Hybrid ECUs | |
| µETK-3.0 |
|
| µETK-P1.0 |
|
| Special ETKs/XETKs | |
| ETK-11.0 |
|
| ETK-T1.1 |
|
| ETK-T2.1 |
|
| Serial ETKs/XETKs | |
| ETK-S1.1B |
1
|
| ETK-S1.1C |
1
|
| ETK-S1.1D |
1
|
| ETK-S2.0 |
1
|
| ETK-S3.0 |
1
|
| ETK-S4.2 |
1
|
| ETK-S5.1 |
1
|
| ETK-S6.0 |
|
Compatible Products
INCA Software Products
INCA is used for measurement, ECU calibration, and diagnostics in the lab, on the test bench, and onboard the vehicle. It integrates a wide variety of ECU and bus interfaces and measuring devices. ASCET generates ECU description files (A2L) for ECU calibration with INCA.
INCA-EIP
With INCA-EIP, engineers can use INCA to calibrate prototypes of ECU functions provided by ASCET-RP on an ES1000 experimental system.
INTECRIO Software Products
INTECRIO is a prototyping environment for ECU functions based on MATLAB®/Simulink® or ASCET models, C code modules, or AUTOSAR software components.
MDA
The MDA Measure Data Analyzer is used to visualize and analyze measurement data provided by ASCET-MD or RP and to prepare stimulation signals for simulating ECU function behavior in ASCET-MD.
Modular ES1000/4000 Series
An ES1000 experimental system hosts VME boards providing simulation controller, ECU and bus interfaces and signal I/O for ECU function development.
ETK
ETKs provide high-bandwidth interfaces to electronic control units for ECU bypass experiments with ASCET-RP.
ASCET Software Products
ASCET Software Products are used for example in the following Applications & Solutions
-
AUTOSAR conformant ETAS tools easily integrate with development environments for ECU software.
