ETAS Logo

ETAS - ES1385 – Resistor Cascade Board (6-CH)

  • Shortcut: Direct to the content of this page
  • Shortcut: Direct to the main navigation
  • To the end of the page
  • ETAS Products
    • Product Search
      • Software Products
      • Hardware Products

        Hardware Products Product Families

        • Modular ES1000/4000 Series
        • Compact ES400 Measurement Mod.
        • Compact ES500 ECU& Bus Interf.
        • Compact ES600 Network Module
        • Compact ES600 Measurement Mod.
        • Compact ES700 Road Test. Mod.
        • Compact ES900 Rapid Prot. Mod.
        • Compact Lambda Measure. Mod.
        • Universal ETK ECU Interfaces
        • Scan Testers
        • NVH Analyzers
    • Applications & Solutions
    • Download Center
    • Support Center
    • Engineering Services
  • ETAS Group

Modular ES1000/4000 Series

  • ES1000.3 – Housing (VME64x)
  • ES1120 – System Controller Board
  • ES1135 – Simulation/System Controller Board
  • ES1222-A – CAN & K-Line Board
  • ES1232-A – ETK Interface Board
  • ES1303 – A/D Board
  • ES1310 – D/A Board
  • ES1321 – PWM I/O Board
  • ES1325 – Digital I/O, PWM I/O and Counter Board
  • ES1335 – Arbitrary Signal Generator Board
  • ES1336 – Angle Synchronous Measurement Board
  • ES1337 – Wheel Speed Sensor Simulation Board
  • ES1385 – Resistor Cascade Board
  • ES1391 – Power Supply Controller Board
  • ES1392 – High Current Switch Board
  • ES1600-A / ES1600-B – Rapid Prototyping Carrier Board
  • ES1620 – Adaptation Board
  • ES1651 – Carrier Board
  • PB1651ADC1 – A/D Module
  • ES4100 – Housing (VME64x)
  • ES4105 – Housing (VME64x)
  • PB4350DAC1 – D/A Module
  • ES4408 – Electrical Load Simulation Module
  • ES4440 – Compact Failure Simulation Module
  • ES4602 – Standard Breakout Panel
  • ES4630 – High Current Breakout Panel
  • ES4640 – Connector Box Powertrain
  • » ETAS Products
  • » Product Search
  • » Hardware Products
  • » Modular ES1000/4000 Series
  • » ES1385 – Resistor Cascade Board

ES1385 – Resistor Cascade Board (6-CH)

ES1385

Board for Simulation of Sensors with Resistive Loads

The ES1385 Resistor Cascade Board is used to simulate ECU sensors with resistive loads. The board is equipped with 6 independent resistor cascades.

Applications are:

  • Simulation of resistive engine temperature sensors
  • Simulation of the internal resistance of a lambda sensor

Variants:
The ES1385 Resistor Cascade Board is available in two different variants: ES1385-B and ES1385-C

Detailed information is available in the current product catalog and in the data sheets.

Page-Tools:

  • Send Page
  • Print Page
  • Contact form
  • Downloads (7)

  • Copyright ETAS 2009
  • Feedback
  • Glossary
  • Sitemap
  • Terms of Use / Privacy Policy