ETAS Logo

ETAS - ES4602 – Standard Breakout Panel

  • Shortcut: Direct to the content of this page
  • Shortcut: Direct to the main navigation
  • To the end of the page
  • ETAS Products
    • Product Search
      • Software Products
      • Hardware Products

        Hardware Products Product Families

        • Modular ES1000/4000 Series
        • Compact ES400 Measurement Mod.
        • Compact ES500 ECU& Bus Interf.
        • Compact ES600 Network Module
        • Compact ES600 Measurement Mod.
        • Compact ES700 Road Test. Mod.
        • Compact ES900 Rapid Prot. Mod.
        • Compact Lambda Measure. Mod.
        • Universal ETK ECU Interfaces
        • Scan Testers
        • NVH Analyzers
    • Applications & Solutions
    • Download Center
    • Support Center
    • Engineering Services
  • ETAS Group

Modular ES1000/4000 Series

  • ES1000.3 – Housing (VME64x)
  • ES1120 – System Controller Board
  • ES1135 – Simulation/System Controller Board
  • ES1222-A – CAN & K-Line Board
  • ES1232-A – ETK Interface Board
  • ES1303 – A/D Board
  • ES1310 – D/A Board
  • ES1321 – PWM I/O Board
  • ES1325 – Digital I/O, PWM I/O and Counter Board
  • ES1335 – Arbitrary Signal Generator Board
  • ES1336 – Angle Synchronous Measurement Board
  • ES1337 – Wheel Speed Sensor Simulation Board
  • ES1385 – Resistor Cascade Board
  • ES1391 – Power Supply Controller Board
  • ES1392 – High Current Switch Board
  • ES1600-A / ES1600-B – Rapid Prototyping Carrier Board
  • ES1620 – Adaptation Board
  • ES1651 – Carrier Board
  • PB1651ADC1 – A/D Module
  • ES4100 – Housing (VME64x)
  • ES4105 – Housing (VME64x)
  • PB4350DAC1 – D/A Module
  • ES4408 – Electrical Load Simulation Module
  • ES4440 – Compact Failure Simulation Module
  • ES4602 – Standard Breakout Panel
  • ES4630 – High Current Breakout Panel
  • ES4640 – Connector Box Powertrain
  • » ETAS Products
  • » Product Search
  • » Hardware Products
  • » Modular ES1000/4000 Series
  • » ES4602 – Standard Breakout Panel

ES4602 – Standard Breakout Panel

Breakout Panel between HiL-System and ECU

The ES4602 Standard Breakout Panel is used to divide the signals between the tested electronic control unit (ECU) and the LABCAR HiL system. It allows the user easily to simulate a cable break simply by pulling a jumper. The center tabs of the jumpers make it possible to access the individual control unit signals externally.

Detailed information can be found in the current product catalog.

Page-Tools:

  • Send Page
  • Print Page
  • Contact form
  • Downloads (1)
  • FAQ

  • Copyright ETAS 2009
  • Feedback
  • Glossary
  • Sitemap
  • Terms of Use / Privacy Policy