ES720 – Drive Recorder
Technical Data
Size and weight |
||
| Dimension | H x W x D: 45 x 126 x 160 mm / 1.75 x 4.9 x 6.3 in | |
| Weight | 800 g / 1.76 lb | |
CPU module |
||
| CPU | 1.6 GHz Single Core | |
| RAM | 1 GB RAM | |
| Memory | 8 GB Compact Flash (16 GB optional) | |
Environment |
||
| Temperature range | -40 °C to +70 °C / -40 °F to +158 °F (operation) [1] | |
| -40 °C to +85 °C / -40 °F to +185 °F (storage) | ||
| Tested for | Mechanical shock, vibration, temperature shock, temperature alteration according to DIN EN60068 res. ISO 16750 | |
Power supply |
||
| Operating voltage | 5 V to 32 V DC | |
| Power consumption (at 14.4 V) | 550 mA typical at 14,4 V (Operation) | |
| 50 mA typical at 14.4 V (Fast Boot Standby) | ||
| 10 mA typical at 14,4 V (Low Power Standby) | ||
| Power management (wake-up / stand-by) |
Automatic power-on by remote input, real-time clock or Ethernet traffic Automatic power-off by remote input, real-time clock or software event |
|
| Protection | Reverse voltage protection, load dump protection | |
Ethernet interfaces |
||
| Number of ports | 1 | |
| Connection and protocol | 10 or 100 Mbit/s Base-T Ethernet TCP/IP | |
Status display |
||
| LEDs | 6 LEDs for power state, measurement state, memory consumption, Ethernet activity, WLAN activity and error condition | |
Compatible hardware |
||
| PC | Desktop or Laptop PC with Ethernet port | |
| ETAS modules | ES4xx Micro Measurement Modules, ES51x Interface and Network Modules, ES520 FlexRay and CAN Interface Module, ES581 CAN Bus Interface USB Module, ES59x Universal Interface Modules, ES6xx Measurement Modules, ES780 Heads-Up Display, | |
| ES910 Prototyping and Interface Module, ES1120 System Controller Board, ES1135 Simulation/System Controller Board, XETK | ||
Software support |
||
| ETAS applications | Supported by INCA V6.2.1 and up | |
| Third-party applications | Supports third-party add-ons for integration of third-party hardware | |
I/O capabilities |
||
| Analog in | Supply voltage monitoring | |
| Digital in | 4 TTL compatible inputs, supported by INCA | |
| Digital out | 4 TTL compatible outputs, supported by INCA | |
| LED state out | TTL compatible outputs reflecting the current LED states | |
| Power state out | TTL compatible output for switching on additional equipment | |
Other interfaces |
||
| VGA | SUB-D type standard VGA port | |
| USB | 4 USB 2.0 compatible type A connectors for additional storage media or other peripherals | |
| WLAN | Built in WLAN connectivity according to IEEE 802.11a/b/g/I (optional) | |
System activation |
||
| Power button | Placed on front panel, can be remotely controlled via TTL compatible input | |
| Ignition ON | TTL compatible input for “Terminal 15” | |
| CAN bus activity | In combination with dedicated ECU and bus access module | |
ES720 boot time until measurement |
||
| From “Low Power Standby” (Suspend to disk) | 60 sec. | |
| From “Fast Boot Standby” (Suspend to RAM) | 10 sec. | |
Boot time until measurement (ES720 in combination with ES593-D Universal ECU and Bus Interface Module) |
||
| CAN monitoring | 1 sec. | |
Notes |
||
| [1] |
Operating temperature range: WLAN Module: 0 °C to +70 °C / 0 °F to +158 °F, VGA Port: -20 °C to +70 °C / -4 °F to +158 °F |
|
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
