The ETK-11 supports the following microcontrollers:
MPC5500 Family
ETK-11.0
The ETK-11 block diagram describes the functional design.
| Item | Characteristics |
|---|---|
|
CPU interface |
2.5 V / 3.3 V compatible bus interface for non-multiplexed bus |
|
Configuration |
Project-specific configuration for memory configurations stored in EEPROM |
|
Board |
Dimensions (H/W/D) approx. 8.9 x 94 x 54 mm / 0.4 x 3.7 x 2.1 in |
|
Power supply |
Input voltage |
|
Emulation memory |
Two memory pages with 1 MB (1024 KB) data memory each, minimum access time 25 nsec |
|
Measured data memory |
One memory page with 256 KB of memory, maximum access time 25 nsec |
|
Flash memory |
1 MB (1024 KB) flash (data) |
|
Serial interface |
100 Mbit/s |
|
Temperature range |
-40°C to +110°C / -40°F to +230°F |