ETAS - ETK-P1.1

ETK-P1.1

The ETK-P1.1 (32 Bit) is microcontroller independent. Please see the table below for further details.

The ETK-P1.1 block diagram describes the functional design.

Item	Characteristics
CPU interface	3.3 V bus interface (5 V tolerant) or non-multiplexed bus 16 bit or 32 bit Supports Freescale processors
Configuration	Project-specific configuration for different processor types and memory configurations
Board	Dimensions (H/W/D) approx. 12 x 100 x 72 mm / 0.5 x 3.9 x 2.8 in
Power supply	Input voltage 4.3 V to 18 V with ETP1 add-on module: 6.5 V to 36 V Standby: min. 3.5 V Input current at 12 V approx. 150 mA normal operation approx. 20 mA standby
Emulation memory	Two memory pages with 128 KB data memory each, minimum access time: 50 nsec
Measured data memory	64 KB
Flash memory	128 KB flash (data)
Serial interface	8/100 Mbit/s double-shielded line, max. 30 m / 100 ft galvanically isolated
Temperature range	-40 °C to +110 °C / -40 °F to +230 °F