ETAS - ETK-P20

Shortcut: Direct to the content of this page
Shortcut: Direct to the main navigation
To the end of the page

ETAS Products
- Product Search
  - Software Products
  - Hardware Products
    Hardware Products Product Families
- Applications & Solutions
- Download Center
- Support Center
- Engineering Services
ETAS Group

Universal ETK ECU Interfaces

ETK-P20

ETKP20

The parallel ETK ETK-P20 supports the following PowerPC microcontrollers:

MPC5554
MPC5553

ETKP20 diagram

The ETK-P20 block diagram describes the functional design.

Item	Characteristics
CPU interface	2.5V / 3.3V compatible bus interface for non-multiplexed bus 16 bit Supports Freescale MPC5554/MPC5553 microcontroller in 416 pin housing
Configuration	Project-specific configuration for memory configurations stored in EEPROM
Board	Dimensions (H/W/D) ETKP20.0-A 9.9 * 62 * 62 mm / 0.39 * 2.44 * 2.44 in ETKP20.0-B 9.9 * 77 * 62 mm / 0.39 * 3.03 * 2.44 in
Power supply	Input voltage 4.3 V to 18 V Standby: min. 4.3 V Input current at 12 V approx. 100 mA normal operation approx. 15 mA standby
Emulation memory	Two memory pages with 1 MB (1024 KB) data memory each, maximum access time 23 nsec
Measured data memory	Within the emulation memory, freely configurable
Flash memory	1 MB (1024 KB) flash (data)
Serial interface	100 Mbit/s double-shielded line, max. 30 m / 100 ft galvanically isolated
Temperature range	-40°C to +110°C / -40°F to +230°F

Page-Tools: