The parallel ETK ETK-P7 supports the following PowerPC microcontrollers:
MPC561
MPC562
MPC563
MPC564
ETK-P7
The ETK-P7 block diagram describes the functional design.
| Item | Characteristics |
|---|---|
|
CPU interface |
3.3 V bus interface (not 5 V tolerant) for non-multiplexed bus |
|
Configuration |
Project-specific configuration for memory configurations stored in EEPROM |
|
Board |
Dimensions (H/W/D) approx. 5 x 61 x 64 mm / 0.2 x 2.4 x 2.5 in |
|
Power supply |
Input voltage |
|
Emulation memory |
Two memory pages with 512 KB data memory each |
|
Measured data |
Within the emulation memory, freely configurable |
|
Flash memory |
512 KB flash (data) |
|
Serial interface |
8/100 Mbit/s |
|
Temperature range |
-40°C to +110°C / -40°F to +230°F |