The serial ETK ETK-S1.1 supports the interfaces AUD and JTAG. Please see the table below for further details.
ETK-S1.1
The ETK-S1.1 block diagram describes the functional design.
| Item | Characteristics |
|---|---|
|
CPU interface |
Supported microprocessors |
|
Configuration |
Project-specific configuration for different controllers or memory configurations stored in EEPROM |
|
Board |
Dimensions (H/W/D) approx. 10 x 40 x 63 mm / 0.4 x 1.6 x 2.5 in |
|
Power supply |
Input voltage |
|
Emulation memory |
Processor-specific |
|
Measured data memory |
Processor-specific |
|
Serial interface |
8/100 Mbit/s |
|
Temperature range |
-40°C to +110°C / -40°F to +230°F |