ETAS - ETK-S2

ETK-S2

The serial ETK ETK-S2 supports the NEXUS interface. Please see the table below for further details.

The ETK-S2 block diagram describes the functional design.

Item	Characteristics
CPU interface	Supported microprocessors: MPC 561/565 with 2 bit MDI / 8 bit MDO, NEXUS configuration; all Freescale with READI module (Full Port Mode FPM only)
Configuration	Project-specific configuration for different chip selects or memory configurations stored in EEPROM
Board	Dimensions (H/W/D) approx. 10 x 51 x 66 mm / 0.4 x 2.0 x 2.6 in
Power supply	Input voltage 4.3 V to 18 V Standby: min. 3.5 V Input current at 12 V approx. 80 mA normal operation approx. 10 mA standby
Serial interface	100 Mbit/s double-shielded line, max. 30 m / 100 ft galvanically isolated
Temperature range	-40°C to +110°C / -40°F to +230°F