ETAS - ETK-T1.1

Shortcut: Direct to the content of this page
Shortcut: Direct to the main navigation
To the end of the page

ETAS Products
- Product Search
  - Software Products
  - Hardware Products
    Hardware Products Product Families
- Applications & Solutions
- Download Center
- Support Center
- Engineering Services
ETAS Group

Universal ETK ECU Interfaces

ETK-T1.1

ETKE1.1

The parallel ETK ETK-T1.1 supports the following microcontrollers:

TC1796
TC1796_ED

ETKT1.1

The ETK-T1.1 block diagram describes the functional design.

Item	Characteristics
CPU interface	2.5 V bus interface (3.3 V tolerant) for non-multiplexed bus 32 bit For Infineon TC1796 and TC1796_ED processors
Configuration	Project-specific configuration for memory configurations stored in EEPROM
Board	Dimensions (H/W/D) approx. 9.9 x 72 x 52 mm / 0.39 x 2.83 x 2.05 in
Power supply	Input voltage 4.3 V to 18 V Standby: min. 4.3 V Input current at 12 V approx. 100 mA normal operation approx. 20 mA standby
Emulation memory	Two memory pages with 512 KB data memory each, minimum access time 18 nsec
Measured data memory	Within the emulation memory, freely configurable
Flash memory	512 KB flash (data)
Serial interface	100 Mbit/s JTAG debugging interface connector double-shielded line, max. 30 m / 100 ft galvanically isolated
Temperature range	-40°C to +110°C / -40°F to +230°F

Page-Tools: