Size and Weight |
|
| Dimensions (HxWxD) | 51.5 x 40 x 142 mm / 2.0 x 1.6 x 5.6 in 37.5 x 40 x 129 mm / 1.5 x 1.6 x 5.1 in (tapered rear) |
| Weight | 350 g / 0.77 lb |
Environment |
|
| Temperature range | -40 °C to +120 °C (-40 °F to +248 °F) (operation) -40 °C to +125 °C (-40 °F to +257 °F) (storage) |
| Protection class | IP67 (with cables connected) |
| Altitude | Up to 5,000 m / 16,400 ft |
| Tested for | Mechanical shock, vibration, fall, temperature shock, temperature alteration, storage in humidity, salt fog attack, impact from flying rocks, according to DIN EN 60068 res. ISO 16750 |
Power supply |
|
| Operating voltage | 5 V to 50 V DC (-40 °C to +85 °C / -40 °F to +185 °F), 6 V to 50 V DC (+85 °C to +125 °C / +185 °F to +257 °F) |
| Power consumption (at 12 V) | 1.8 W typ. (operation), < 25 mW (stand-by) |
| Reverse voltage protection; Load dump protection | Via Cables CBEP410 / 415 / 420 / 430 / 450 |
Host interface |
|
| Ethernet connection and protocol | 100 Base-T, Full-Duplex required, XCP-on-UDP/IP |
| IP address | Dynamic via INCA or configuration tool (default 192.168.40.44) |
Inputs |
|
| Channels | 8 |
| Supported thermocouples | Type B, E, J, K, N, S, T, R, automatically detected via splitter cable |
| Resolution | 1 mK over whole measurement range, 24 bit ΔΣADC |
| Sampling rate | 0.1 Samples/s to 50 Samples/s, configurable per channel |
| Anti-aliasing filter (in hardware) | ΔΣADC combined with single-pole low pass filter with 350 Hz corner frequency |
| Electrical isolation of inputs | Channel to channel and channel to supply |
| Maximum common mode voltage | ±100 V [1]channel to supply ground |
Accuracy [2] |
|
| Basic accuracy ΔTg | B ±(0.10 % x (TMeas - Tcjc) ±5.0 K) E ±(0.10 % x (TMeas - Tcjc) ±0.2 K) J ±(0.06 % x (TMeas - Tcjc) ±0.2 K) K ±(0.05 % x (TMeas - Tcjc) ±0.25 K) N ±(0.07 % x (TMeas - Tcjc) ±0.38 K) R ±(0.10 % x (TMeas - Tcjc) ±2.0 K) S ±(0.10 % x (TMeas - Tcjc) ±2.0 K ) T ±(0.10 % x (TMeas - Tcjc) ±0.3 K) |
| Maximum temperature drift ΔTd | B ±0.2 K/K x (Tenv - 25 °C) E ±0.008 K/K x (Tenv - 25 °C) J ±0.008 K/K x (Tenv - 25 °C) K ±0.01 K/K x (Tenv - 25 °C) N ±0.016 K/K x (Tenv - 25 °C) R ±0.008 K/K x (Tenv - 25 °C) S ±0.008 K/K x (Tenv - 25 °C) T ±0.01 K/K x (Tenv - 25 °C) |
| Accuracy ΔTi depending on the internal resistance RTC of the TC at RTC> 50 Ω | B ±0.04 K/Ω E ±0.0015 K/Ω J ±0.0015 K/Ω K ±0.002 K/Ω N ±0.003 K/Ω R ±0.015 K/Ω S ±0.015 K/Ω T ±0.002 K/Ω |
| Accuracy of cold junction compensation ΔT cjc | ±0.4 K, over whole operation temperature range |
| Maximum temperature drift ΔTdcjc of cold junction compensation | ±0.002 K/K x (Tenv - 25 °C) |
Support by ETAS Software |
|
| Supported by INCA V5.3 and higher, INTECRIO V3.0 and higher, ES400 configuration and integration tool for XCP applications | |
Notes |
|
| [1] | 60 V maximum for use inside the US. |
| [2] | Total error of a temperature measurement ΔT = ΔTg + ΔTd + ΔTi + ΔTcjc + ΔTdcjc. |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.