Technical Data

Size and Weight

Dimensions (HxWxD) 45 mm x 127 mm x 160 mm / 1.75 in x 5.0 in x 6.3 in (housing)
Weight 0,8 kg / 1.8 lbs


Temperature range -40 °C to +70 °C (-40 °F to +158 °F) (operation)
-40 °C to +85 °C (-40 °F to +185 °F) (storage)
Relative humidity 0% to 85% (Operations), non-condensing
0% to 95% (Storage)
Electrical isolation All interfaces are electrically isolated
Ingress protection IP30
Operating Current Range 9 A Max. (module max. 3A; o/p current per ETH 2 A max.)

Power supply

Operating voltage 7 V to 29 V DC
Power consumption (at 14,4 V) 500 mA typical at 14,4 V (typical, operation)
20 mA typical at 14,4 V (typical, stand-by)
Power management (wake-up / stand-by) Power-on/off when Ethernet traffic starts/stops (PC or upstream module on/off), power-on when data traffic on CAN starts
Protection Reverse voltage protection, load dump protection

CAN FD / CAN interface

Number of channels 4
Mode of operation CAN FD or CAN operation can be configured for each port individually by software. 2 channels provide wake-up on CAN functionality.
Protocols CCP (not on CAN FD), XCP, KWP-on-CAN (ISO 14230/ISO 15765), UDS (ISO 14229/ISO 15765), CAN Monitoring, OBD-on-CAN (ISO 15765-4)
Maximum baud rate on CAN 1Mbit/ sec (Max Speed), 8 Bytes (Payload)
Maximum baud rate on CAN FD 5Mbit/ sec (higher number of nodes and sub-topology), 8Mbit/ sec (point to point connection), 64 Bytes (Payload)
Transceiver (Physical Layer) TJA1044G, Standard (V2.0a) or Extended Format (V2.0b), ISO High-speed mode, CAN-FD (non-ISO CAN FD V1 and ISO 11898-2:2015 )
Data synchronization The ETAS hardware synchronization feature enables precise synchronization of all internal, i.e. CAN, and connected signals. This Premium Line hardware feature reduces the deviation between signals down to 1µs, without use of external cables or special set

Ethernet interface

Number of channels 1 upstream channel
3 downstream channels
Connection and protocols 10/100 Base-T, TCP/IP, Ethernet Switching (Layer 2), IEEE802.3
Time synchronization Time resolution: 1 µs
Power supply of connected downstream devices ES4xx and ES6xx measurement modules, maximum 2 A per interface independent of the power supply voltage

Status display

LEDs Operation, interfaces, synchronization

Compatible hardware

PC / Upstream ETAS Module Desktop or Laptop-PC with Ethernet port, ES51x, ES592, ES593-D, ES595, and ES600 Network and Interface Modules
Downstream ETAS Module ES520, ES590, ES591, ES592, ES593-D, ES595, and ES600 Network and Interface Modules, ES4xx and ES6xx Measurement Modules, ES910 Prototyping and Interface Module, ES930 Multi I/O Module, XETK

Software support

Firmware Update Support starts from HSP V10.7.0
INCA Supported starts from INCA V7.1.7
3rd Party SW support Easy integration in any application by using the ETAS Bus Interfaces Integration Package (EBI-IP)

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.