Size and Weight |
|
| Dimensions (HxWxD) | 36 x 127 x 160 mm / 1.4 x 5 x 6.3 in |
| Weight | Approx. 850 g / 1.87 lb |
Environment |
|
| Temperature range | -40 °C to +50 °C / -40 °F to +122 °F (operation) |
| -40 °C to +85 °C / -40 °F to +185 °F (storage) | |
Power supply |
|
| Input voltage | 6 V to 32 V DC |
| Power consumption | 14 W (typically) / 20 W (max.) |
| Stand-by current | < 25 mA |
Host interface |
|
| Ethernet connection | 10/100/1000 Base-T |
| Protocol | TCP/IP |
| IP address | Dynamic |
Simulation target |
|
| Main processor | NXP PowerQUICC™ III MPC8548 with 800 MHz clock Double precision floating point unit |
Memory |
|
| RAM | 512 MByte DDR2-RAM (400 MHz clock) |
| Flash | 64 MByte Flash |
| NVRAM | 128 kByte NVRAM |
ECU and bus interfaces |
|
| ETK | 1 Channel, ETK Mode: Basic, Compatibility, Advanced ETK bypass method: hook based or service based (Service Based Bypass (SBB V2) and SBB V3 [1]) |
| ECU | 1 channel Operation Modes: XETK interface, iLinkRT Bypass methods: SBB V2 Application: Measurement, calibration and bypass with XETK, Test bench connection via iLintRT™ using INCA-MCE [2] |
| CAN | 2 Channels, High Speed (up to 1 MBaud) or Low Speed |
| LIN | 2 Channels, LIN V2.2A |
Other interfaces |
|
| Extension modules | ES920 FlexRay Module (1 Node with 2 channels) or ES921 CAN Module (2 CAN channels) or ES922 CAN FD Module (2 CAN FD channels) |
| I/O: ES400 / EtherCAT interface | Connection of ES400 Micro Measurement Modules and ES63x Lambda Modules for rapid prototyping applications |
| EtherCAT connection to test bench for INCA-MCE[3] | |
Wake-up |
|
| SP: service port | wake-up control input, manual trigger input for security functions such as emergency stop and shutdown scenarios |
| PC | Wake-up over Ethernet interface |
| CAN | Wake-up over CAN |
Safety and comfort features |
|
| Wake-up control input of service port | |
| Operating system | Advanced user watchdog |
| LEDs | For quick status check |
| User LEDs | User programmable |
| Buzzer | User programmable |
| Buffered realtime clock | Buffer period: 2 days (min.), 1 week at +25 °C / +77 °F (typically) |
Support by ETAS Software [5] |
|
| INTECRIO, ASCET-RP, INCA, INCA-EIP, ODX-LINK/ODX-FLASH (Diagnosis and Flash-Programming via CAN), INCA-MCE with INCA [4], RTA-TRACE, HSP | |
Notes |
|
| [1] | SBB V3 with INTECRIO V4.0, HSP V9.4; for ES910.3 only (not for ES910.2) |
| [2] | iLinkRT™ with INCA V7.0, INCA-MCE V1.0, HSP V9.4; for ES910.3 only (not for ES910.2) |
| [3] | EtherCAT with INCA V7.0, INCA-MCE V1.0, HSP V9.4; for ES910.3 only (not for ES910.2) |
| [4] | INCA-MCE V1.0 requires INCA V7.0, HSP V9.4.0, for ES910.3 only (not for ES910.2) |
| [5] | Please contact your local ETAS representative to request the compatible versions. |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.