Technical Data


Size and Weight

Dimensions (HxWxD) 20 x 35 x 83 mm / 0.79 x 1.38 x 3.27 in
Weight 50 g / 0.11 lb


Temperature range -40 °C to +50 °C / -40 °F to +122 °F (operation)
-40 °C to +85 °C / -40 °F to +185 °F (storage)

Power supply

Input voltage 3.3 V / 5 V
Power consumption 1.2 W (typically) / 1.8 W (max.)
Stand-by current < 1.2 mA

FlexRay bus interface

FlexRay controller 1 node with 2 channels
BOSCH E-Ray IP-Module FPGA based
Conformance with FlexRay protocol specification V2.1
Sending and/or receiving of up to 128 frames during a communication cycle
Support for payloads up to 254 bytes
Hardware filtering for slot counter, cycle counter and channel
Hardware supported redundancy handling over both channels
Network management supported
Physical layer Philips TJA1080 transceiver (on both channels)
Electric isolation Both channels are electrically isolated from each other and from other circuitry
Wake-up Wake-up and sleep functionality

Comfort features

LEDs For quick status check on FlexRay bus
Conformance to FlexRay specification V2.1 ISO 9646

Support by ETAS Software

INTECRIO V3.1.1, INCA V7.0.0 with HSP V8.0.0 and higher, ASCET-RP V6.2.1 with HSP V8.1.0 and higher

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.