Compatible Products

Software

Hardware Service Pack (HSP)
The HSP Hardware Service Pack facilitates an easy firmware update of ETAS hardware products.

INCA Software Products
INCA integrates all ETKs, FETKs, and XETKs plus a wide variety of bus interfaces and measuring devices.

INTECRIO
Using INTECRIO, ECU functions based on ASCET or MATLAB®/Simulink® models, C code modules, or AUTOSAR software components can be prototyped with an ES1000 experimental system or an ES910 Rapid Prototyping Module and an ETK/XETK bypass.

ASCET INTECRIO INCA RTA
Specific ETKs (for Power PC Microcontrollers)
ETK-P4  OK 1 V1.0.1 V3.1.0
ETK-P7  OK 1 V1.0.1 V4.0.2
ETKs/XETKs for Vertical Base Board (MPC55xx)
ETK-V1.1 V5.0.1 V1.0.1 V5.2.1
XETK-V1.0 V3.1 V6.0 OK
XETK-V2.0 V6.1 V3.2 V6.2.1
Special ETKs/XETKs
ETK-11.0 V5.5 V2.1 V5.4.1
ETK-T1.1 V5.0.1 V1.0.1 V5.1.0/5
ETK-T2.2 V5.4.0 V1.1.0 V6.2.1  2
XETK-T2.2 V3.2 V6.2.1 OK
ASCET INTECRIO INCA RTA
Serial ETKs/FETKs/XETKs
BR_XETK-S1.0 V6.3 V4.5 V7.1
BR_XETK-S2.0 V6.3 V4.5 V7.1
BR_XETK-S3.0 V6.4 V4.6 V7.2
ETK-S4.2 3 V5.4 V1.1 V5.3
ETK-S6.0 V5.6 V2.1 V5.4.1
ETK-S9.0 V6.1 V3.2 V6.2.1
ETK-S20.1A V6.1.3 V4.2 V7.0
ETK-S21.1 V6.1.3 V4.2 V7.0
ETK-S22.0 V6.1.3 V4.2 V7.1
FETK-S1.1 V6.4 V4.6 V7.2
FETK-S2.1 V6.4 V4.6 V7.2
XETK-S4.2 V7.0
XETK-S20.1 V4.2.2 V7.0
XETK-S21.0 V6.1.3 V4.2.2 V7.1 SP4
XETK-S22.0 V6.4 V4.6 V7.2 SP7
XETK-S30.0 V6.3 V4.5 V7.1
XETK-S31.0 V6.3 V4.5 V7.1
ASCET INTECRIO INCA RTA
Trace FETK
FETK-T1.1 V6.4 V4.6 V7.2

Notes:
1: INCA V3.2 in parallel to ASCET V4.1.2 and TIPExp V4.3.0.
2: INCA V5.4.0 support is possible when configured as ETK-T2.1
3: ECU needs to support DISTAB 13.

Hardware

ES500 – ECU & Bus Interface Modules
ES51x Network and Interface Modules connect multiple XETK ECUs with the INCA PC.

ES800 – Measurement, Calibration, Prototyping System
The hardware modules of the ES800 family are offered for prototyping, calibration, and validation of highly powerful electronic controls and automotive systems. With ES800 modules in combination with the real-time capable FETK ECU interfaces, signals of electronic controls can be recorded at high rates synchronously to signals of vehicle buses and networks and processed with low latencies.

ES900 – Prototyping and Interface Modules
The ES900 Rapid Prototyping Modules provide high simulation power, an AUTOSAR compliant real-time operating system, and a wide range of ECU and bus interfaces.