XETK-V2.0

XETK-V2.0  
 

CPU interface

Bus interface 2.5 V/ 3.3 V (auto-detect) Nexus/JTAG interface
2.5 V/ 3.3 V address/data bus interface for 32 bit multiplexed bus (XETK-V2.0A/C)
Supported processors NXP* MPC5600 & ST SPC5600 microprocessors on VertiCal Base Board (XETK-V2.0A/C) (* former Freescale)
NXP* MPC5600 & ST SPC5600 microprocessors in all packages (XETK-V2.0B) (* former Freescale)
For a complete list of supported microprocessors, please refer to the product's User's Guide.
Configuration Project-specific configuration for memory configurations stored in EEPROM

Board

Dimensions (HxWxD) Approx. 12 x 60 x 60 mm/ 0.47 x 2.4 x 2.4 in (XETK-V2.0A/C)
Approx. 9 x 60 x 60 mm/ 0.35 x 2.4 x 2.4 in ( XETK-V2.0B)

Power supply

Input voltage 4.3 V to 36 V
Stand-by: min. 4.3 V
Input current at 12V approx. 130 mA normal operation (XETK-V2.0A/C)
Approx. 110 mA normal operation (XETK-V2.0B)
approx. 30 mA stand-by (XETK-V2.0A/C)
Approx. 21 mA stand-by (XETK-V2.0B)

Memory emulation

On-board memory 2 MB Synchronous RAM (XETK-V2.0A)
n/a (XETK-V2.0B)
4 MB Synchronous RAM (XETK-V2.0C)
Emulation memory ECU-specific, freely configurable within on-board memory (XETK-V2.0A/C)
ECU-specific, freely configurable within ECU memory (XETK-V2.0B)
Measured data memory ECU-specific

Host interface

Serial interface 100 Mbit/s
Double-shielded line, 30 m/100 ft max.
Electrically isolated
Debug interface 50 pin Samtec Nexus/JTAG debugging interface connector (XETK-V2.0A/C)
ECU-specific external circuit and connector required (XETK-V2.0B)

Operation temperature

Temperature range -40 °C to +110 °C / -40 °F to +230 °F

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.

Ordering Information

1 – Ethernet PC Connection
2 – Ethernet PC Connection - Adapter Cable
3 – Ethernet Connection - Adapter Cable
4 – Ethernet Connection
5 – XETK Connection
6 – Power Supply Connection
7 – ECU Connection

Order Name Short Name Order Number
XETK-V2.0
XETK-V2.0 Emulator Probe with 2MByte emulation memory for NXP* MPC5600 & ST SPC5600 microprocessors, ECU adaption via VertiCal Base Board XETK‑V2.0A F‑00K‑106‑941 F00K106941 F-00K-106-941
XETK-V2.0 Emulator Probe without emulation memory for NXP* MPC5600 & ST SPC5600 microprocessors, ECU adaption via 50 pin Samtec XETK‑V2.0B F‑00K‑107‑036 F00K107036 F-00K-107-036
XETK-V2.0 Emulator Probe with 4MByte emulation memory for NXP* MPC5600 & ST SPC5600 microprocessors, ECU adaption via VertiCal Base Board XETK‑V2.0C F‑00K‑109‑733 F00K109733 F-00K-109-733
Optional Accessories for XETK-V2.0
1 – Ethernet PC Connection
Ethernet PC Connection Cable 1 Gbit/s, Lemo 1B FGE - RJ45 (10mc-8mc), 3 m CBE200‑3 F‑00K‑104‑373 F00K104373 F-00K-104-373
Ethernet PC Connection Cable 1 Gbit/s, Lemo 1B FGE - RJ45 (10mc-8mc), 8 m CBE200‑8 F‑00K‑104‑374 F00K104374 F-00K-104-374
2 – Ethernet PC Connection - Adapter Cable (CBE230-PC)
Ethernet Connection Adapter Cable 1 GBit/s, Lemo 1B PHE - RJ45 (10fc- 8mc), 1m2 CBAE200‑1m2 F‑00K‑105‑760 F00K105760 F-00K-105-760
3 – Ethernet ES600 Connection - Adapter Cable (CBE230-ES600)
Ethernet Connection Adapter Cable 1 GBit/s to 100 MBit/s, Lemo 1B PHE - Lemo 1B FGF (10fc-8mc), 0m5 CBAE330‑0m5 F‑00K‑105‑759 F00K105759 F-00K-105-759
4 – Ethernet ES910 / ES592 / ES595 Connection
Ethernet Connection Cable 1 GBit/s, Lemo 1B FGE - Lemo 1B FGE (10mc- 10mc), 3 m CBE230‑3 F‑00K‑105‑757 F00K105757 F-00K-105-757
Ethernet Connection Cable 1 GBit/s, Lemo 1B FGE - Lemo 1B FGE (10mc- 10mc), 8 m CBE230‑8 F‑00K‑105‑758 F00K105758 F-00K-105-758
5 – XETK Connection
XETK ECU Adapter Cable, 100 Mbit/s, Shield on ECU-Housing, Lemo 1B HME - JST PHR (10fc-5fc), 0m38 CBAM230‑0m38 F‑00K‑105‑791 F00K105791 F-00K-105-791
XETK ECU Adapter Cable, 100 MBit/s, Lemo 1B PHE - JST PHR (10fc-5fc), 0m6 CBAM240‑0m6 F‑00K‑105‑792 F00K105792 F-00K-105-792
XETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHE - JST PHR (10fc-5fc), 0m50 CBAM271‑0m5 F‑00K‑107‑867 F00K107867 F-00K-107-867
5&6 – XETK and Power Supply Connection
XETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHE - JST PHR (10fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50 CBAM270‑0m5 F‑00K‑107‑866 F00K107866 F-00K-107-866
XETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHE - JST PHR (10fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m70 CBAM270‑0m7 F‑00K‑108‑479 F00K108479 F-00K-108-479
6 – Power Supply Connection
ETK Power Supply Cable, JST PHR - open wires (2fc-2c), 0m19 ETV Y‑261‑A24‑446 Y261A24446 Y-261-A24-446
ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 KA50 F‑00K‑000‑940 F00K000940 F-00K-000-940
External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m K70.1 F‑00K‑109‑270 F00K109270 F-00K-109-270
7 – ECU Connection (XETK-V2.0B)
ETAH1 XETK ECU Adapter, Samtec - Mictor (50mc - 38mc), 0m21 ETAH1 F‑00K‑105‑252 F00K105252 F-00K-105-252
ECU Connection Protection Cap (for CBAM230, CBAM240)
Cap to protect open Lemo 1B sockets against dirt, cost effective CAP_LEMO_1B_LC F‑00K‑105‑683 F00K105683 F-00K-105-683

* former Freescale