CPU interface |
|
Supported processors | NXP* MPC57xx and ST Microelectronics SPC/EMU57xx/58xx and SPC58x families (* former Freescale) |
For a complete list of supported microprocessors, please refer to the product's User's Guide. | |
Configuration | Project-specific configuration for memory configurations stored in EEPROM |
Board |
|
Dimensions (HxWxD) | 11.8 x 45 x 40 mm / 0.465 x 1.772 x 1.575 in (11.8 x 57 x 40 mm / 0.465 x 2.244 x 1.575 in - with mounting holes) |
Power supply |
|
Input voltage | 4.3 V to 36 V |
Cranking voltage < 3 sec: 3V | |
Input current at 12 V | approx. 135 mA normal operation |
approx. 35 mA normal stand-by | |
Memory emulation |
|
Emulation memory | Processor-specific |
Measured data memory | Processor-specific |
Host interface |
|
Serial interface | 100 Mbit/s |
Double-shielded line, max. 30 m/100 ft | |
Electrically isolated | |
Operation temperature |
|
Temperature range | -40 °C to +110 °C / -40 °F to +230 °F |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Ordering Information

1 – ECU Connection
2 – Automotive Ethernet Connection
3 – Automotive Ethernet Connection
4 – Media Converter (PC Connection)
5 – Media Converter (ES523, ES59x, ES600, ES89x, ES910 Connection)
Order Name | Short Name | Order Number |
---|---|---|
BR_XETK-S2.0 | ||
BR_XETK-S2.0A Emulator Probe for the NXP* MPC57xx and ST Microelectronics SPC/EMU57xx/58xx and SPC58x microcontroller families | BR_XETK‑S2.0A | F‑00K‑109‑477 |
![]() |
||
Optional Accessories for BR_XETK-S2.0 | ||
1 – ECU Connection | ||
ETAM2 ETK ECU Adapter, MOLEX - open wires (6fc - 6c), 0m25 | ETAM2 | F‑00K‑109‑306 |
![]() |
||
ETAM5 FETK ECU Adapter, MOLEX - MOLEX (6fc - 5fc+1c), 0m136 | ETAM5 | F‑00K‑110‑101 |
![]() |
||
ETAM3 ETK ECU Adapter, ERNI - SAMTEC (12fc - 10fc), 0m11 | ETAM3 | F‑00K‑109‑673 |
![]() |
||
2 – Automotive Ethernet Connection | ||
ETABR1 Automotive Ethernet interface cable, MOLEX à open wires (ECU), 0,3m (2fc - 2c) Single wires which need to be twisted while mounting | ETABR1 | F‑00K‑109‑771 |
![]() |
||
ETABR2 Automotive Ethernet interface cable, MOLEX à MOLEX (ECU), 0,17m (2fc - 2c) | ETABR2 | F‑00K‑111‑118 |
![]() |
||
ETABR3 Automotive Ethernet Interface Cable, MOLEX – open wire (2fc-2c), 0m33 | ETABR3 | F‑00K‑111‑964 |
![]() |
||
CBAM290 Automotive Ethernet interface cable, pre-assembled into M10 screwing, shield on ECU-Housing MOLEX à Lemo, 0,60m (2fc - 2c) | CBAM290.1‑0m6 | F‑00K‑111‑117 |
![]() |
||
BR_XETK ECU Adapter and Power Supply Cable, pre-assembled into M12 screwing, shield on ECU housing, Lemo 1B PHA - MOLEX (2fc-2fc) / Lemo 1B PHG – open wire (2fc-1c), 0m6 | CBAM295.1‑0m6 | F‑00K‑111‑656 |
![]() |
||
BR_XETK ECU Adapter and Power Supply Cable, pre-assembled into M12 screwing, shield on ECU housing, Lemo 1B PHA - MOLEX (2fc-2fc) / Lemo 1B PHG – open wire (2fc-1c), 1m8 | CBAM295.1‑1m8 | F‑00K‑111‑657 |
![]() |
||
3 – Automotive Ethernet Connection | ||
4 – Media Converter (PC Connection) | ||
Media Converter Cable, DSUB - RJ45 (9mc-8mc), 1m | CBEB100.1‑1m0 | F‑00K‑110‑094 |
![]() |
||
5 – Media Converter (ES523, ES59x, ES600, ES89x, ES910 Connection) [1] | ||
ES165.1 Media Converter (1xAE) with Lemo connector | ES165.1 | F‑00K‑112‑184 |
![]() |
[1] You can find the suitable adapter cable for the Media Converter to your BR_XETK on the ES16x Ordering Information page.
Note: This list contains only a selection of available adapters. A comprehensive overview is available in the User Guide of each ETK.