Technical Data
CPU interface |
|
Supported processors | Renesas RH850 Family |
For a complete list of supported microprocessors, please refer to the product's User's Guide. | |
Configuration | Project-specific configuration for memory configurations stored in EEPROM |
Board |
|
Dimensions (HxWxD) | approx. 9.8 x 40 x 60 mm/0.386 x 1.575 x 2.362 in |
Power supply |
|
Input voltage | 5 V to 36 V |
Cranking voltage < 3 sec: 3 V | |
Input current at 12 V | approx. 100 mA normal operation |
approx. 28 mA stand-by | |
Memory emulation |
|
Emulation memory | Processor-specific |
Measured data memory | Processor-specific |
Host interface |
|
Serial interface | 100 Mbit/s |
Double-shielded line, max. 30 m/100 ft | |
Electrically isolated | |
Operation temperature |
|
Temperature range | -40 °C to +110 °C / -40 °F to +230 °F |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Ordering Information
1 – Interface Connection
2 – ETK Connection (for all 100 Mbit ETKs)
3 – Power Supply Connection
4 – ECU Connection
5 – Ethernet PC Connection
Order Name | Short Name | Order Number |
---|---|---|
ETK-S22.0 | ||
ETK-S22.0 Emulator Probe for the Renesas RH850 microprocessor family, ECU adaption via 10 SAMTEC 5 pin JST plug, with further adapter | ETK‑S22.0A | F‑00K‑109‑126 |
Optional Accessories for ETK-S22.0 | ||
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910) | ||
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 3 m | CBM150‑3 | F‑00K‑102‑556 |
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 5 m | CBM150‑5 | F‑00K‑102‑557 |
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 10 m | CBM150‑10 | F‑00K‑102‑553 |
2 – ETK Connection (for all 100 Mbit ETKs) | ||
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 | KA54 | F‑00K‑001‑302 |
ETK ECU Adapter Cable, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 | KA55 | F‑00K‑001‑303 |
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m085 | CBAM200.2‑0m085 | F‑00K‑104‑312 |
ETK ECU Adapter Cable, Shield on ECU-housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m130 | CBAM200‑0m130 | F‑00K‑104‑852 |
ETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m50 | CBAM261‑0m5 | F‑00K‑107‑754 |
2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs) | ||
ETK ECU Adapter and Power Supply Cable, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m6 | CBAM210‑0m6 | F‑00K‑104‑873 |
ETK ECU Adapter and Power Supply Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m60 | CBAM220‑0m6 | F‑00K‑105‑075 |
ETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50 | CBAM260‑0m5 | F‑00K‑107‑753 |
3 – Power Supply Connection | ||
ETK Power Supply Cable with Filter Coil, JST PHR - open wires (2fc-2c), 0m19 | ETV2 | F‑00K‑000‑593 |
ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 | KA50 | F‑00K‑000‑940 |
External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m | K70.1 | F‑00K‑109‑270 |
ETK power supply for 4,3-36V DC input, with galvanic isolation | ETP2 | F‑00K‑104‑010 |
4 – ECU Connection (ETK-S22.0) | ||
ETAL1 ETK ECU Adapter, Erni - SAMTEC (50fc - 10fc), 0m136 | ETAL1 | F‑00K‑107‑679 |
ETK Power Supply Cable, JST PAP – open wires (5fc-2c), 0m25 | ETV3 | F‑00K‑109‑141 |
Housing | ||
Water-proof case, designed for ETK-S4.x, ETK-S6.x and ETK-S2x | ETKS_C3 | F‑00K‑107‑683 |
5 – Ethernet PC Connection
Further information on the Ethernet PC Connection, can be found in the cable page Ethernet Connection.
Note: This list contains only a selection of available adapters. A comprehensive overview is available in the User Guide of each ETK.