ETK-S4.2 – ECU Interface

Technical Data

ETK-S4.2C  
ETK-S4.2C  

CPU interface

Supported processors Infineon TC1766, TC1766ED, TC1767ED, TC1782ED, TC1796, TC1796ED, TC1797ED
For a complete list of supported microprocessors, please refer to the product's User's Guide.
Configuration Project-specific configuration for memory configurations stored in EEPROM

Board

Dimensions (HxWxD) approx. 9.8 x 40 x 60 mm/0.386 x 1.575 x 2.362 in

Power supply

Input voltage 4.3 V to 18 V
Stand-by: min. 4.3 V
Input current at 12 V approx. 100 mA normal operation
approx. 20 mA stand-by

Memory emulation

Emulation memory Processor-specific
Measured data memory Processor-specific

Host interface

Serial interface 100 Mbit/s
Double-shielded line, max. 30 m/100 ft
Electrically isolated

Operation temperature

Temperature range -40 °C to +110 °C / -40 °F to +230 °F

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.

Ordering Information

1 – Interface Connection
2 – ETK Connection (for all 100 Mbit ETKs)
3 – Power Supply Connection
4 – ECU Connection
5 – Ethernet PC Connection

Order Name Short Name Order Number
ETK-S4.2
ETK-S4.2A Emulator Probe for the Infineon JTAG debug interface from AUDO-F or AUDO-NG microprocessor, ECU adaption via 26 pin Erni plug ETK‑S4.2A F‑00K‑104‑960 F00K104960 F-00K-104-960
ETK-S4.2B Emulator Probe for the Infineon AUDO-F and AUDO-NG microprocessor, ECU adaption via 12 pin Erni and 7 pin JST plug ETK‑S4.2B F‑00K‑105‑529 F00K105529 F-00K-105-529
ETK-S4.2C Emulator Probe for the Infineon JTAG debug interface from AUDO-MAX microprocessor, ECU adaption via 12 pin Erni and 7 pin JST plug ETK‑S4.2C F‑00K‑106‑737 F00K106737 F-00K-106-737
Optional Accessories for ETK-S4.2
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910)
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 3 m CBM150‑3 F‑00K‑102‑556 F00K102556 F-00K-102-556
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 5 m CBM150‑5 F‑00K‑102‑557 F00K102557 F-00K-102-557
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 10 m CBM150‑10 F‑00K‑102‑553 F00K102553 F-00K-102-553
2 – ETK Connection (for all 100 Mbit ETKs)
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 KA54 F‑00K‑001‑302 F00K001302 F-00K-001-302
ETK ECU Adapter Cable, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 KA55 F‑00K‑001‑303 F00K001303 F-00K-001-303
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m085 CBAM200.2‑0m085 F‑00K‑104‑312 F00K104312 F-00K-104-312
ETK ECU Adapter Cable, Shield on ECU-housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m130 CBAM200‑0m130 F‑00K‑104‑852 F00K104852 F-00K-104-852
ETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m50 CBAM261‑0m5 F‑00K‑107‑754 F00K107754 F-00K-107-754
2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs)
ETK ECU Adapter and Power Supply Cable, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m6 CBAM210‑0m6 F‑00K‑104‑873 F00K104873 F-00K-104-873
ETK ECU Adapter and Power Supply Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m60 CBAM220‑0m6 F‑00K‑105‑075 F00K105075 F-00K-105-075
ETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50 CBAM260‑0m5 F‑00K‑107‑753 F00K107753 F-00K-107-753
3 – Power Supply Connection
ETK Power Supply Cable with Filter Coil, JST PHR - open wires (2fc-2c), 0m19 ETV2 F‑00K‑000‑593 F00K000593 F-00K-000-593
ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 KA50 F‑00K‑000‑940 F00K000940 F-00K-000-940
External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m K70.1 F‑00K‑109‑270 F00K109270 F-00K-109-270
ETK power supply for 6-36V DC input ETP1 F‑00K‑000‑624 F00K000624 F-00K-000-624
ETK power supply for 4,3-36V DC input, with galvanic isolation ETP2 F‑00K‑104‑010 F00K104010 F-00K-104-010
4 – ECU Connection (ETK-S4.2A)
ETAF1 ETK ECU Adapter, Erni - Erni (26fc - 26fc),0m1 ETAF1 F‑00K‑001‑373 F00K001373 F-00K-001-373
4 – ECU Connection (ETK-S4.2B)
ETAI1 ETK ECU Adapter, Erni - Samtec (12fc - 10fc),0m16 ETAI1 F‑00K‑105‑542 F00K105542 F-00K-105-542
ETAI2 ETK ECU Adapter, JST PHR - open wires (7fc - 7c),0m25 ETAI2 F‑00K‑105‑543 F00K105543 F-00K-105-543
ETAI3 ETK ECU Adapter, JST PHR - JST PHR (7fc - 7fc),0m25 ETAI3 F‑00K‑105‑544 F00K105544 F-00K-105-544
4 – ECU Connection (ETK-S4.2C)
ETAI1 ETK ECU Adapter, Erni - Samtec (12fc - 10fc),0m16 ETAI1 F‑00K‑105‑542 F00K105542 F-00K-105-542
ETAI5 ETK ECU Adapter with short ED supply and GND lines, JST PHR - open wires (7fc - 2c+5c), 0m25 ETAI5 F‑00K‑106‑773 F00K106773 F-00K-106-773
Debugger Connection
Debug Adapter from Infineon OCDS1-Plug to ETK ETAF5.0 F‑00K‑104‑220 F00K104220 F-00K-104-220
Microcontroller Power Supply for ECU (Microcontroller specific)
Power supply for ECU with 1,5V microcontroller ETP4 F‑00K‑104‑914 F00K104914 F-00K-104-914
Power supply for ECU with 1,3V microcontroller ETP5 F‑00K‑106‑798 F00K106798 F-00K-106-798
Housing
Water-proof case, designed for ETK-S4.x, ETK-S6.x and ETK-S2x ETKS_C3 F‑00K‑107‑683 F00K107683 F-00K-107-683
ECU Connection Protection Cap (for CBAM230, CBAM240)
Cap to protect open Lemo 1B sockets against dirt, cost effective CAP_LEMO_1B_LC F‑00K‑105‑683 F00K105683 F-00K-105-683

5 – Ethernet PC Connection

Further information on the Ethernet PC Connection, can be found in the cable page Ethernet Connection.