ETK-V1.1 – ECU Interface

 
 

CPU interface

Bus interface 2.5 V/ 3.3 V (auto-detect) bus interface for non-multiplexed bus
16 bit
Supported processors For VertiCal Base Boards from NXP* MPC55xx, MPC56xx and ST SPC56x (* former Freescale)
For a complete list of supported microprocessors, please refer to the product's User's Guide.
Configuration Project-specific configuration for memory configurations stored in EEPROM

Board

Dimensions (HxWxD) approx. 10 x 54 x 54 mm/ 0.4 x 2.1 x 2.1 in

Power supply

Input voltage 4.3 V to 18 V
Stand-by: min. 4.3 V
Input current at 12 V approx. 100 mA normal operation
max. 30 mA Stand-by

Memory emulation

Emulation memory Two memory pages with 1 MB (1024 KB) data memory each, minimum access time 23 nsec
Measured data memory Within the emulation memory, freely configurable
Flash memory 1 MB (1024 KB) flash (data)

Host interface

Serial interface 100 Mbit/s
Double-shielded twisted-pair, max. 30 m /100 ft
Electrically isolated

Operation temperature

Temperature range -40 °C to +110 °C / -40 °F to +230 °F

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.

Ordering Information

1 – Interface Connection
2 – ETK Connection (for all 100 Mbit ETKs)
3 – Power Supply Connection
4 – ECU Connection
5 – Ethernet PC Connection

Order Name Short Name Order Number
ETK-V1.1
ETK-V1.1 Emulator probe with 1MByte EMU RAM for VertiCal Base Board of NXP* MPC55xx, MPC56xx and STMicro SPC56x (* former Freescale) ETK‑V1.1A F‑00K‑107‑242 F00K107242 F-00K-107-242
ETK-V1.1 Emulator probe with 1MByte EMU RAM for VertiCal Base Board of NXP* MPC55xx, MPC56xx and STMicro SPC56x, with additional holes for mounting inside the ECU housing (* former Freescale) ETK‑V1.1B F‑00K‑107‑243 F00K107243 F-00K-107-243
Optional Accessories for ETK-V1.1
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910)
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 3 m CBM150‑3 F‑00K‑102‑556 F00K102556 F-00K-102-556
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 5 m CBM150‑5 F‑00K‑102‑557 F00K102557 F-00K-102-557
ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 10 m CBM150‑10 F‑00K‑102‑553 F00K102553 F-00K-102-553
2 – ETK Connection (for all 100 Mbit ETKs)
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 KA54 F‑00K‑001‑302 F00K001302 F-00K-001-302
ETK ECU Adapter Cable, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6 KA55 F‑00K‑001‑303 F00K001303 F-00K-001-303
ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m085 CBAM200.2‑0m085 F‑00K‑104‑312 F00K104312 F-00K-104-312
ETK ECU Adapter Cable, Shield on ECU-housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m130 CBAM200‑0m130 F‑00K‑104‑852 F00K104852 F-00K-104-852
ETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m50 CBAM261‑0m5 F‑00K‑107‑754 F00K107754 F-00K-107-754
2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs)
ETK ECU Adapter and Power Supply Cable, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m6 CBAM210‑0m6 F‑00K‑104‑873 F00K104873 F-00K-104-873
ETK ECU Adapter and Power Supply Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m60 CBAM220‑0m6 F‑00K‑105‑075 F00K105075 F-00K-105-075
ETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50 CBAM260‑0m5 F‑00K‑107‑753 F00K107753 F-00K-107-753
3 – Power Supply Connection
ETK Power Supply Cable with Filter Coil, JST PHR - open wires (2fc-2c), 0m19 ETV2 F‑00K‑000‑593 F00K000593 F-00K-000-593
ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 KA50 F‑00K‑000‑940 F00K000940 F-00K-000-940
External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m K70.1 F‑00K‑109‑270 F00K109270 F-00K-109-270
ETK power supply for 6-36V DC input ETP1 F‑00K‑000‑624 F00K000624 F-00K-000-624
ETK power supply for 4,3-36V DC input, with galvanic isolation ETP2 F‑00K‑104‑010 F00K104010 F-00K-104-010
Debugger Connection
Debug Adapter from Infineon OCDS1-Plug to ETK ETAF5.0 F‑00K‑104‑220 F00K104220 F-00K-104-220
Microcontroller Power Supply for ECU (Microcontroller specific)
Power supply for ECU with 1,5V microcontroller ETP4 F‑00K‑104‑914 F00K104914 F-00K-104-914
Power supply for ECU with 1,3V microcontroller ETP5 F‑00K‑106‑798 F00K106798 F-00K-106-798
ECU Connection Protection Cap (for CBAM230, CBAM240)
Cap to protect open Lemo 1B sockets against dirt, cost effective CAP_LEMO_1B_LC F‑00K‑105‑683 F00K105683 F-00K-105-683
4 – ECU Connection
To put the ETK on the ECU an additional VertiCal Base Board of NXP* is required. (* former Freescale)

5 – Ethernet PC Connection

Further information on the Ethernet PC Connection, can be found in the cable page Ethernet Connection.