CPU interface |
|
| Supported processors | Infineon Aurix Family (TC2xx and TC3xx) |
| For a complete list of supported microprocessors, please refer to the product's User's Guide. | |
| Configuration | Project-specific configuration for memory configurations stored in EEPROM |
Board |
|
| Dimensions (LxWxH) | 60 x 45,25 x 121 mm / 2,362 x 1,781 x 0,4721 in 60 x 45,25 x 14,92 mm / 2,362 x 1,781 x 0,5872 in (Note 1: Height does not include an adapter connector) (Note 2: Height includes a cable ETAM2 mounted at the CON2 connector) |
Power supply |
|
| Input voltage | 6,6 V to 32 V |
| Cranking voltage < 3 sec: 3V | |
| Input current at 12 V | Approx. 240 mA normal operation |
| Approx. 106 mA normal standby | |
| Approx. 3 mA deep standby | |
Memory emulation |
|
| Emulation memory | Processor specific |
| Measured data memory | Processor specific |
Host interface |
|
| Connection | 1 Gbit/s Ethernet |
| Cable length | max. 30 m/100 ft |
| Ethernet interface | DC decoupling |
Operation temperature |
|
| Temperature range | -40 °C to +110 °C / -40 °F to +230 °F |
This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.
Ordering Information
1 – ES89x Interface Cable
2 – ECU Adapter Cables
3 – Power Supply Cables
4 – FETK - ECU Adapter
5 – Ethernet PC Connection
| Order Name | Short Name | Order Number |
|---|---|---|
| FETK-T1.1 | ||
| Emulator Probe for the Infineon TC2xx AURIX microcontroller family, ECU adaption via 10 pin SAMTEC, 20 pin SAMTEC and 6 pin MOLEX plug, with further adapter | FETK‑T1.1A | F‑00K‑110‑882 |
 |
||
| Emulator Probe for the Infineon TC3xx AURIX microcontroller family, ECU adaption via 10 pin SAMTEC, 20 pin SAMTEC and 6 pin MOLEX plug, with further adapter | FETK‑T1.1B | F‑00K‑111‑265 |
|
||
| Optional Accessories for FETK-T1.0 | ||
| 1 – ES89x Interface Cable | ||
| 1 GBit/s Ethernet Connection and Power Supply Cable, Lemo 1B FGM - Lemo 1B FGH (10fc-10mc), 3 m | CBE260.1‑3 | F‑00K‑109‑446 |
 |
||
| 1 GBit/s Ethernet Connection and Power Supply Cable, Lemo 1B FGM - Lemo 1B FGH (10fc-10mc), 8 m | CBE260.1‑8 | F‑00K‑109‑447 |
|
||
| 2 – ECU Adapter Cable | ||
| FETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHM - JST SHR (10mc-9fc), 0m60 | CBAM300.2‑0m6 | F‑00K‑110‑411 |
 |
||
| FETK ECU Adapter Cable, shield on ECU-Housing, Lemo 1B PHM - JST SHR (10mc-9fc), 0m60 | CBAM340.1‑0m6 | F‑00K‑109‑302 |
 |
||
| 2&3 – Combined ECU Adapter and Power Supply Cable | ||
| FETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHM - JST SHR (10mc-9fc) / Lemo 0B PHG - open wire (2fc-1c), 0m60 | CBAM305.1‑0m6 | F‑00K‑109‑297 |
 |
||
| 3 – Power Supply Cables | ||
| External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m | K70.1 | F‑00K‑109‑270 |
 |
||
| ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2 | KA50 | F‑00K‑000‑940 |
 |
||
| 4 – FETK - ECU Adapter | ||
| ETAM2 ETK ECU Adapter, MOLEX - open wires (6fc - 6c), 0m25 | ETAM2 | F‑00K‑109‑306 |
 |
||
| ETAM4 FETK Trace ECU Adapter, SAMTEC SSH - SAMTEC STH (20fc - 20mc), 0m17 | ETAM4 | F‑00K‑109‑979 |
 |
||
| ETAM5 FETK ECU Adapter, MOLEX - MOLEX (6fc - 5fc+1c), 0m136 | ETAM5 | F‑00K‑110‑101 |
 |
||
| ETAM8B BR_XETK-S3 ECU Adapter, FCI - SAMTEC SFM (20c - 10fc), 0m11 | ETAM8B | F‑00K‑110‑881 |
 |
||
5 – Ethernet PC Connection
Further information on the Ethernet PC Connection, can be found on the cable page Ethernet Connection.