ES134.1
ES134.1 - LIN extension module
The ES134.1 interface extension module detects signals from ECU interfaces and vehicle buses. It is designed for vehicle ECU calibration, diagnostics, and flash programming. It enables the easy extension of a set-up with additional LIN channels and supports multi-client host connections. The module can be integrated with third-party tools and infrastructures.
Your benefits
High performance
Improves transmission rate up to 20kbps with with state-of-the-art transceiver.
Full reliability
Facilitates high level of stability with robust LEMO connectors/ splash water protection.
Scalable and integrable
Makes the set-up scalable and allows easy integration into other applications.
Advanced connectivity functions : full flexibility
The ES134.1 interface extension module comes with a wide range of state-of-the-art connectivity options specifically for the automotive industry:
- Connection to two independent electrically isolated LIN channels
- Connection to FE ports of other ETAS hardware devices using ETAS time synchronization hardware
- Easy possibility to create a flexible set-up for LIN, CAN FD and XETK use cases
- Rendering of third-party software compatibility with ETAS BOA
- Equipped with the latest technology LIN transceivers.
Technical data
| Size and Weight | ||
|
Size and Weight
Dimensions (HxWxD)
|
92 mm x 48 mm x 24 mm / 3.62 in x 1.89 in x 0.95 in (housing)
|
|
|
Size and Weight
Dimension with the Integrated Cable
|
24 mm x 48 mm x 1592 mm / 0.95 in x 1.89 in x 62.68 in
|
|
|
Size and Weight
Weight
|
0.18 kg / 0.4 lb (with cable)
|
|
|
Size and Weight
Environment
|
|
|
|
Size and Weight
Temperature range
|
-40 °C to +60 °C / -40 °F to +140 °F (operation)
|
|
|
Size and Weight
|
-40 °C to +85 °C / -40 °F to +185 °F (transport and storage)
|
|
|
Size and Weight
Relative humidity range
|
15 % to 95 %, non-condensing
|
|
|
Size and Weight
Ingress Protection
|
IP42
|
|
|
Size and Weight
Power supply
|
||
|
Size and Weight
Power consumption
|
<200 mA Input current at 12V
|
|
|
Size and Weight
Operating Voltage
|
6 V- 32 V
|
|
|
Size and Weight
LIN interfaces
|
|
|
|
Size and Weight
Number of channels
|
2 LIN channels, with DSUB 9 connector
LIN versions upward V2.0 supported |
|
|
Size and Weight
LIN transceiver
|
TLIN1029-Q1
|
|
|
Size and Weight
Max. baud rate
|
20 Kbit/s (High Speed LIN Flashing is not available)
|
|
|
Size and Weight
Electrical isolation
|
The LIN Interfaces are electrically isolated from the FE interface
|
|
|
Size and Weight
Acquisition of synchronous data
|
||
|
Size and Weight
|
ES134.1 supports the ETAS Hardware Time Synchronization, i.e., connected to an FE connection on an ETAS device it is synchronized with 1µs to the other signals in that system.
|
|
|
Size and Weight
Host requirements
|
|
|
|
Size and Weight
Ethernet
|
100BASE-T
|
|
|
Size and Weight
Connection
|
Lemo Connector, coded for ETAS FE sockets
|
|
|
Size and Weight
Software support
|
|
|
|
Size and Weight
Firmware Update
|
Supported as of HSP V14.3.0
|
|
|
Size and Weight
INCA
|
Supported as of INCA V7.5.3
ES134.1 is integrated native into INCA like any other ETAS HW device. |
|
|
Size and Weight
Supported use cases
|
INCA supports all available CAN protocols on the ES132.1.
ES132.1 supports CAN based measurement modules |
|
|
Size and Weight
Delivery content
|
|
|
|
Size and Weight
Accessories
|
CBCF100-0m3
CAN and FlexRay Interface Y-Cable, DSUB – 2 x DSUB (9fc-9mc+9mc), 0m3 F-00K-107-939 |
|
|
Size and Weight
ECU and BUS Interface module
|
ES134.1 LIN (2 x LIN) interface extension module with Lemo 1B FGC (8mc) Ethernet connection.
Including Y-Cable CBCF100.1-0m3 |
|
Contact us
Do you have any questions? Feel free to send us a message. We will be more than happy to help. Contact us today!