ES595
ES595 – Interface module
The ES595 Interface Module provides one ETK and one XETK/Ethernet connection, two CAN and LIN interfaces as well as one FlexRay interface with two channels. For connecting and synchronizing XETK ECUs, additional interface hardware or measurement modules, the ES595 is equipped with an Ethernet interface in addition to the PC port.
Functions at a glance
- Universal interface module
- Rugged compact metal housing
- PC connection via Ethernet interface (100 Mbit/s)
- 1 ETK and 1 XETK/Ethernet interface for demanding measurement applications
- 1 FlexRay interface with 2 channels
- 2 CAN interfaces
- 2 LIN interfaces
- Acquisition of time synchronous measurements
- Seamless integration with INCA
Technical data
| Size and Weight | |
|
Size and Weight
Dimensions (HxWxD)
|
45 mm x 127 mm x 160 mm / 1.75 in x 5.0 in x 6.3 in (housing)
|
|
Size and Weight
Weight
|
0.8 Kg / 1.8 lbs
|
|
Size and Weight
Environment
|
|
|
Size and Weight
Temperature range
|
-40 °C to +70 °C / -40 °F to +158 °F (operation)
|
|
Size and Weight
|
-40 °C to +85 °C / -40 °F to +185 °F (storage)
|
|
Size and Weight
Relative humidity
|
0% to 85 % (Operations) , non-condensing
|
|
Size and Weight
|
0% to 95 % (Storage)
|
|
Size and Weight
Tested for
|
Mechanical shock, vibration, fall, temperature shock, temperature alteration, according to EN 60068 and ISO 16750
|
|
Size and Weight
Ingress protection
|
IP30
|
|
Size and Weight
Operating Current Range
|
5 A Max. (module max. 3A; o/p current per ETH 2 A max.)
|
|
Size and Weight
Power supply
|
|
|
Size and Weight
Operating voltage
|
7 V to 29 V DC
|
|
Size and Weight
Power consumption (at 14.4 V)
|
500 mA at 14.4 V (typical, operation)
|
|
Size and Weight
|
20 mA at 14.4 V (typical, stand-by)
|
|
Size and Weight
Power management (wake-up / stand-by)
|
Power-on/off when Ethernet traffic starts/stops (PC or upstream module on/off)
|
|
Size and Weight
Protection
|
Reverse voltage protection, load dump protection
|
|
Size and Weight
Ethernet interfaces
|
|
|
Size and Weight
Connection and protocols
|
10/100 Base-T; TCP/IP
|
|
Size and Weight
Time synchronization
|
Time resolution: 1 μs
|
|
Size and Weight
Power supply of connected devices
|
ES4xx and ES6xx measurement modules, XETKs
|
|
Size and Weight
ECU and bus interfaces
|
|
|
Size and Weight
|
2 x Independent CAN, 2 x Independent LIN, 1 x FlexRay node with two independent channel
|
|
Size and Weight
ETK
|
Operating Mode : Basic, Compatibility, Advanced, Protocol Transfer : Single Mode supports speed of 8Mbit/s Block Mode supports either 8Mbit/s or 100 Mbit/s
|
|
Size and Weight
LIN
|
LIN Transceiver: MCZ33661EF, Specification: LIN V2.1, Operating Mode: LIN Master
|
|
Size and Weight
FlexRay
|
Bus Driver: Philips TJA 1082, Payload: 254 bytes (Max.), Specification: V2.1
|
|
Size and Weight
CAN
|
2 channels, optionally High Speed (up to 1 MBaud) or Low Speed
|
|
Size and Weight
High Speed CAN
|
CAN Transceiver: TJA1040, Speed: Max. 1 MBaud with a bus length of 20 m
|
|
Size and Weight
Low Speed CAN
|
CAN Transceiver: TJA1054A, Speed: Max. 125 kBaud
|
|
Size and Weight
Status display
|
|
|
Size and Weight
LEDs
|
Operation, interfaces, synchronization
|
|
Size and Weight
Compatible hardware
|
|
|
Size and Weight
PC / ETAS Upstream Module
|
Desktop or Laptop PC with Ethernet port, ES592, ES593-D, ES595, and ES600 Network and Interface Modules
|
|
Size and Weight
ETAS Downstream Module
|
ES592, ES593-D, ES595, ES600 Network and Interface Modules, ES4xx and ES6xx Measurement Modules, ES910 Prototyping and Interface Module, XETK
|
|
Size and Weight
Support by ETAS software
|
|
|
Size and Weight
INCA
|
INCA V6.2.1 and up
INCA-LIN V6.2.3 and up |
|
Size and Weight
Firmware Update
|
Support starts from HSP V2.1.6
|
|
Size and Weight
Host interface
|
|
|
Size and Weight
Fast Ethernet
|
2 x 10 / 100BASE-T Ethernet (Downstream), ETH1, ETH2 supports ETAS device synchronization mechanism
|
|
Size and Weight
Ethernet
|
1 x 10 / 100BASE-T (Upstream)
|
|
Size and Weight
Host PC
|
Supports 100Mbit/s, full duplex RJ45 connection with 32-bit data bus
|
|
Size and Weight
Protocol
|
TCP/IP, Ethernet Switching (Layer 2), IEEE802.3
|
Contact us
Do you have any questions? Feel free to send us a message. We will be more than happy to help. Contact us today!