|
Product Family / Category
|
Product / Topic
|
Type
|
Title
|
Date
|
ASCET | ASCET V6.0, ASCET V6.1, ASCET V6.2, ASCET V6.3, ASCET V6.4 | FAQ / Use Case | ASCET System Constant as parameter in the experiment
ASCET System Constant as parameter in the experiment
ASCET System Constants are resolved at a specific time during the build process. In this article, Steffen Roser (Support Engineer at ETAS) shows the 3 possible alternatives Generation Time, Compile Time and Run Time. | 09/11/2018 |
ISOLAR | AUTOSAR, ISOLAR-A, ISOLAR-B | FAQ / Use Case | ISOLAR-A and ISOLAR-B: Intelligent delete feature
ISOLAR-A and ISOLAR-B: Intelligent delete feature
When deleting a component in my AUTOSAR project then the AUTOSAR authoring tool shall delete referenced data elements as well. In this article, Steffen Roser (Support Engineer at ETAS) presents the "intelligent" delete functionality of ISOLAR-A and ISOLAR-B. | 09/07/2018 |
ISOLAR, Virtualization Technology | ISOLAR-EVE | FAQ / Use Case | Compile and debug VECUs of ISOLAR-EVE with Microsoft Visual Studio
Compile and debug VECUs of ISOLAR-EVE with Microsoft Visual Studio
How to use Microsoft Visual Studio to compile and debug VECUs in ISOLAR-EVE? In this article, Steffen Roser (Support Engineer at ETAS) provides a step by step guide from selecting the Visual Studio compiler in ISOLAR-EVE to debugging the VECU in Visual Studio. | 09/06/2018 |
ES5300, LABCAR Software / System | DESK-LABCAR, ES5340, LABCAR-RTPC | Flyer / Brochure / White Paper | DESK-LABCAR Flyer
DESK-LABCAR – Compact Hardware-in-the-Loop System
At a Glance
A ready to start, compact Hardware-in-the-Loop system that provides a real-time test environment with professional LABCAR technology
The basic configuration contains 4 analog and 20 digital input channels and 8 analog and 8 digital output channels, open for further extensions.
Galvanical isolation of all channels and … | 09/06/2018 |
COSYM | COSYM | Technical Article | Development and testing of distributed functions with ETAS COSYM: Simulation and virtualization of vehicle systems
Development and testing of distributed functions with ETAS COSYM: Simulation and virtualization of vehicle systems
How can automated driving functions involving numerous electronically controlled vehicle systems quickly be brought to full-scale production while maintaining high quality and competitive prices? And what is the best design for complex drives with electric and combustion engines, vehicle batteries, catalytic converters, and … | 09/06/2018 |
ES400 | ES410, ES411, ES420, ES430 / ES432, ES441 | Flyer / Brochure / White Paper | ES400 Product Family Flyer
ES400 Measurement Modules
Functions at a Glance
Measurements at the signal source minimize errors due to interference and damping
Damage-free keyhole instrumentation of test vehicles
Very small form factor and smart stacking concept
Rugged water, dust, and temperature proofed modules
Scalable and easy to configure … | 09/06/2018 |
ETK / XETK / FETK | FETK-S1, FETK-S2, FETK-T1 | Flyer / Brochure / White Paper | FETK – ECU Interfaces
FETK ECU Interfaces provide an extremely powerful access to ECUs. Because of its high user data transmission rate, FETKs fit perfectly for validation and calibration of ECUs. On the other hand because of their excellent real-time behavior FETKs are ideally suited for prototyping new functions of automotive electronic systems.
At a Glance
High data transmission rates up to 20 MB/s
XCP-on-Ethernet access to … | 09/06/2018 |
ES800 | ES820 | Flyer / Brochure / White Paper | Flyer ES820 – Drive Recorder Module
ES820 – Drive Recorder Module
The drive recorder module of the ES800 measurement, calibration, and prototyping system can be used for a variety of measurement tasks in the development, calibration, and validation of electronic vehicle systems.
At a Glance
Next-generation drive recorder module for challenging in-vehicle measurement applications
Unattended measurement and recording of data from ECUs, buses, … | 09/06/2018 |
ES800 | ES882 | Flyer / Brochure / White Paper | Flyer ES882 – BR_XETK ECU and Bus Interface Module
ES882 – BR_XETK ECU and Bus Interface Module
With the ES882 BR_XETK ECU and Bus Interface Module, ECUs and vehicle buses can be connected to the ES800 measurement, calibration and prototyping system via Automotive Ethernet. Together with the BR_XETK Automotive Ethernet ECU interface and the INCA software tool, ETAS offers a solution for validating and calibrating interconnected electronic systems both in the vehicle and on the test bench. … | 09/06/2018 |
ES800 | ES891, ES892 | Flyer / Brochure / White Paper | Flyer ES891 / ES892 – FETK ECU and Bus Interface Module
ES891 / ES892 – FETK ECU and Bus Interface Module
The ES891/ES892 ECU and Bus Interface Modules are the key members of the modular ES800 Measurement, Calibration, and Prototyping System. Together, ETAS‘ ES891/ES892 modules, FETK, and INCA provide a future-proof solution for the validation and calibration of electronic systems in the vehicle and at the test bench.
At a Glance
FETK Interface Module of the ES800 Measurement, … | 09/06/2018 |
LABCAR Software / System | LABCAR-AUTOMATION, LABCAR-OPERATOR, LABCAR-RTPC, PT-LABCAR | Flyer / Brochure / White Paper | LABCAR Flyer
LABCAR
Modular HiL Testing System for Automotive Electronic Control Units
Functions at a Glance
Compact real-time testing system for automotive Embedded Control Units (ECUs)
Open, modular system architecture for simulation models, software, hardware, test automation, and time-synchronous ECU access
PC-based simulation with extensive possibilities (Dual-Core, … | 09/06/2018 |