|
Product Family / Category
|
Product / Topic
|
Type
|
Title
|
Date
|
| Measurement Probes | CBS10x | Flyer / Brochure / White Paper | CBS10x Flyer
CBS10x - Smart Lambda Sensor Cable
At a Glance
Bosch LSU 4.9 wideband lambda sensors are very easy to integrate into open-loop and closed-loop control systems
The sensor can be directly connected to the cable’s original Bosch connector
Choose between measurements of oxygen content, λ-value, or the lambda sensor’s pump current
Proportional current or voltage output
LSM 11 … | 11/16/2019 |
| ES5000 | ES5398 | Manual / Technical Documentation | ES5398 Safety Advice
| 11/16/2019 |
| ES4000 | ES4710 | Manual / Technical Documentation | Safety Advice ES4710.1
| 11/16/2019 |
| ES4000 | ES4720 | Manual / Technical Documentation | Safety Advice ES4720.1
| 11/16/2019 |
| ASCET | ASCET-DEVELOPER | Flyer / Brochure / White Paper | ASCET-DEVELOPER Flyer
ETAS ASCET-DEVELOPER is a tool for modelbased development of application software for embedded systems. ASCET-DEVELOPER has been specifically designed to produce products in high volumes, at low cost, to industry standards and with zero defects. ASCET-DEVELOPER enables software engineers to build high-performance, lowoverhead, easily maintainable, safe, and secure embedded software. ASCET models can be developed in Embedded Software … | 11/15/2019 |
| ES5000, LABCAR Software / System | DESK-LABCAR, ES5340, LABCAR-RTPC | Flyer / Brochure / White Paper | DESK-LABCAR Flyer
DESK-LABCAR – Compact Hardware-in-the-Loop System
At a Glance
A ready to start, compact Hardware-in-the-Loop system that provides a real-time test environment with professional LABCAR technology
The basic configuration contains 4 analog and 20 digital input channels and 8 analog and 8 digital output channels, open for further extensions.
Galvanical isolation of all channels and … | 11/15/2019 |
| ES400 | ES410, ES411, ES420, ES430 / ES432, ES441 | Flyer / Brochure / White Paper | ES400 Product Family Flyer
ES400 Measurement Modules
Functions at a Glance
Measurements at the signal source minimize errors due to interference and damping
Damage-free keyhole instrumentation of test vehicles
Very small form factor and smart stacking concept
Rugged water, dust, and temperature proofed modules
Scalable and easy to configure … | 11/15/2019 |
| ES400 | ES415 | Flyer / Brochure / White Paper | ES415 – High Definition A/D Module with Sensor Supply Flyer
ES415 – High Definition A/D Module with Sensor Supply
The ES415 measurement module includes an analog-digital converter for high definition measurements on analog signals.
4 electrically isolated measurement channels with adjustable and short circuit proof sensor supply are available for measurement. Data can be sampled at up to 100 kHz on each measurement channel.
At a Glance
| 11/15/2019 |
| ES500 | ES523 | Flyer / Brochure / White Paper | ES523 Flyer
ES523 – CAN FD Interface Module
The ES523 CAN FD Interface Module is designed to calibrate ECUs and capture measurement data from ECUs and their environment.
It provides four CAN and three Ethernet connections and supports the new high-performance CAN FD (CAN with flexible data rate) protocol on all CAN channels.
At a glance
Four electrically isolated CAN channels with Bosch … | 11/15/2019 |
| ES5000 | ES5455 | Manual / Technical Documentation | ES5455.1 / ES5450.3 / ES5451.4 / ES5452.1 / ES5453.1 / ES5457.1 / ES5458.1 Safety Advice
| 11/15/2019 |
| ES500 | ES583 | Flyer / Brochure / White Paper | ES583 Flyer
ES583 – USB FlexRay Bus Interface
At a Glance
Compact and cost-efficient FlexRay interface for the PC
Direct and easy connection via USB
Appropriate for measurement, calibration, diagnostics and ECU flash programming
Full INCA integration
Electrical isolation of FlexRay interface and PC
With integrated synchronization node
Open interface for integration in software … | 11/15/2019 |
