|
Product Family / Category
|
Product / Topic
|
Type
|
Title
|
Date
|
| RTA | RTA-BSW, RTA-OS | Technical Article | Efficient Basis for Fusing Camera Data and Ultrasonic Signals
Bosch is currently preparing the next generation of its near-range camera system for series production. The system combines ultrasonic sensors and at least four near-range cameras to monitor the vehicle’s surroundings. Thanks to intelligent data processing on a single ECU with a multicore microprocessor, the system can detect both static and moving objects, providing a solid basis for safe and reliable automated parking. A hypervisor … | 07/04/2019 |
| ETK / XETK / FETK | ETAN, FETK-T3 | Manual / Technical Documentation | ETAN8 User Guide
| 07/04/2019 |
| INCA | INCA-FLOW, INCA-RDE | Technical Article | Measurement and Evaluation System for Driveability
Measurement and Evaluation System for Driveability
When people buy a car, they expect to get a carefully tuned driving experience that corresponds to their chosen brand. However, the number of test vehicles is limited and they are only available late in the development process. Thus, calibration engineers often have to tune the driving behavior of numerous vehicle variants and models under intense time pressure. Currently, they rely on … | 07/04/2019 |
| ASCET | ASCET V6.4, ASCET-SE | Software | ASCET-SE V6.4.2 Hotfix 1
ASCET-SE V6.4.2 Hotfix 1
This hotfix contains the most current bug fixes for ASCET-SE V6.4.2. The functionality of the bug fixes has been thoroughly tested and guaranteed. However, this hotfix has not been subject to the complete release tests of ASCET. Therefore, it is not possible to guarantee the usual high quality standards for this hotfix.
ETAS GmbH accepts no further obligation in relation to this hotfix.
If you … | 07/03/2019 |
| ETK / XETK / FETK | BR_XETK-S2 | Manual / Technical Documentation | BR_XETK-S2.0A Release Notes
| 06/29/2019 |
| ETK / XETK / FETK | ETAN, XETK-S22 | Manual / Technical Documentation | ETAN5 Data Sheet
| 06/29/2019 |
| ETK / XETK / FETK | XETK-S31 | Manual / Technical Documentation | XETK-S31.0C Release Notes
| 06/29/2019 |
| INCA | INCA V6.3, INCA V7.0, INCA V7.1, INCA V7.2 | FAQ / Use Case | How to transmit the process point of a curve or map via ASAP3?
How to transmit the process point of a curve or map via ASAP3?
By means of "MeasureCal" it is possible to display process points as vitual measure variables. | 06/28/2019 |
| EHOOKS, INCA | EHOOKS, INCA V7.1, INCA V7.2 | FAQ / Use Case | Bypass stops working after 5 minutes
Bypass stops working after 5 minutes
You start a bypass operation, and all of a sudden, after 3 - 5 minutes, the bypass operation is getting stopped. In this article, Steffen Roser (support engineer at ETAS) points you to further information about the reasons for this behavior and how to fix it. | 06/26/2019 |
| ES400, ES600, ES900, INCA, INTECRIO | ES410, ES411, ES413, ES415, ES420, … | FAQ / Use Case | How to start the Daisy Chain Configuration Tool
How to start the Daisy Chain Configuration Tool
The Daisy Chain Configuration Tool, which is either integrated into INCA or provided as a standalone program, enables you to configure the modules of the ES4xx, ES63x and ES93x product families on your PC. In this article, Steffen Roser (Support Engineer at ETAS) describes where to find this tool and how to start it. | 06/26/2019 |
| INCA | INCA V7.0, INCA V7.1, INCA V7.2 | FAQ / Use Case | How to switch emulation pages (reference/working page) via ASAP3
By command 202 (EXTENDED ExecuteService) the ASAP3 Standard allows to switch the emulation page in an ECU. | 06/26/2019 |
