Technical Data

Host system requirements for typical virtual execution and generation of virtual ECUs on one Windows PC using ISOLAR-EVE

Minimal [1] Recommended
Hardware 2 GHz PC 3 GHz PC
4 GB RAM 8 GB RAM
Processor Intel Core i family
Hard disk IDE or SATA, min. 80 GB SSD, 200 GB
DVD-ROM drive for software installation
Operating system WINDOWS® 7 SP1 (x64), WINDOWS® 8 SP1 (x64), WINDOWS® 8.1 (x64),
WINDOWS® 10 (x64)
WINDOWS® 7 SP1 (x64)

RTPC-EVE host system requirements for execution of virtual ECUs on one dedicated PC with RTPC-EVE

Minimal Recommended
Hardware 1.5 GHz PC 2.5 GHz PC
2 GB RAM 4 GB RAM
Processor Intel Core i family
Multi-core processor recommended
Graphic VGA-compatible
Monitor Is only required for basic installation
Keyboard PS/2 or USB, is only required for basic installation
Hard disk IDE or SATA, min. 80 GB
Ethernet adapter for the connection to the user PC Onboard Ethernet adapter. Most standard types are supported, e.g. Realtek 8139, SiS900, Intel PRO/100 (8255x Ethernet Controller) and particularly all Ethernet adapters supported by Linux kernel 2.6.33.
IDE or SATA, is only required for basic installation (bootable)
Ethernet crossover cable (2x RJ45 socket) for the connection between the host PC (tooling) and the target PC.
Operating System Not necessary

Note

[1] The minimum system requirements specified refer to the sole use of ISOLAR-EVE. Using ISOLAR-EVE in combination with other simulation, test automation, or vizalisation tools the system requirements may be insufficient.

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.

Supported real-time interfaces to connect real hardware components:

  • ETAS ES5340 (digital and analog I/O)
  • IXXAT IB200 PCIe CAN (by HMS)